Surge vessel 80 M3 Volume: 80,000 liters Position: Vertical/Horizontal Vessel Type: Bladder Type Bladder Material: Polyurethane Maximum Service Pressure: 12 Barg Hydrostatic test Pressure: 18 Barg Structural Calculations at Temperature: 60 C Manufacture Code: Codap95 Outlet: DN 900 Internal Paint System: 3x35 microns epoxy (Endokote) External Paint System: 1x35 microns zinc Rich Primer (epoxy), 2x35 intermediate epoxy, 1x35 microns Finish Lacquer - RAL to be defined Note: - The offered water hammering protection system is a complete system. All instrumentation required to monitor the pressures and the levels are also included. - The system should be connected to the pipeline which is going to be protected. Piping and fittings required for this connection are not included as we do not know where the vessels will be located. Size of these fittings/piping should be of the same size (and drilling class) as the outlet of the vessel. Generally speaking, what will be needed is the following: a. T (main pipe line / Vessel outlet) b. Elbow c. Pipes with suitable lengths d. Isolating valve if it is required to isolate the vessel